Hindo Corp, we are an exporter of premium leather products, We're passionate about crafting exceptional, high-quality products that embody the essence of elegance and sophistication, With a keen eye for detail and a commitment to excellence, our team...
- (+91) 9167487306
- info@hindocorp.com
- D701 satellite garden 1, Gen.A.K.Vaidya marg, goregaon east, , Mumbai, Maharashtra, India. 400063
© 2020 HINDO CORP. All Rights Reserved
Why Industrial Surfaces Need Protective Coatings
Industrial roofs and floors are continuously exposed to weather, water, heat, operational traffic and environmental contaminants. Without appropriate protection and maintenance, these conditions can contribute to corrosion, surface damage, leakage and premature deterioration.
Protective coatings can help address:
Hindo Corp’s Coating Capabilities
Hindo Corp provides coating solutions for suitable industrial and commercial surfaces. The proposed system is selected after reviewing the surface material, existing condition, exposure and required protection.
The service may include:
Steel Tech Spray – Roof
Hindo Corp offers Steel Tech Spray – Roof, identified as STS-RF, as a protective solution for metal and concrete roofing applications. The system is positioned to support waterproofing, anti-corrosion performance and thermal protection.
STS-RF applications may include:
Industrial Metal Roof Coating
Metal roofs are commonly used for factories, warehouses and pre-engineered buildings. Continuous exposure to moisture, sunlight and atmospheric conditions can affect roof sheets, fasteners, joints and flashings.
A protective metal-roof coating may support:
Concrete Roof Coating
Concrete roofs may develop cracks, porous areas or damaged joints that allow water to penetrate the structure. A suitable coating system can create an additional protective layer over the prepared surface.
Concrete-roof treatment may address:
Industrial Roof Waterproofing
Roof waterproofing helps protect buildings, machinery, stored materials and internal working areas from water ingress. Before coating begins, the surface should be inspected to identify the actual causes and locations of leakage.
Waterproofing work may focus on:
Anti-Corrosion Roof Protection
Corrosion can affect metal-roof surfaces, fasteners, flashings and supporting components. Proper surface preparation and a compatible protective coating can help reduce direct exposure to moisture and environmental contaminants.
Anti-corrosion treatment may involve:
Thermal Protection for Industrial Roofs
Industrial roofs receive direct solar exposure, which can contribute to heat transfer into the building. A suitable thermal-protection coating may help manage external heat exposure as part of a wider building-performance strategy.
Thermal planning should also consider:
Roof Coatings for Pre-Engineered Buildings
Pre-engineered buildings frequently use metal roofing systems that require regular inspection and maintenance. Hindo Corp’s combined PEB and coating capabilities support coordinated evaluation of both the roof surface and its associated components.
Inspection areas may include:
Industrial Floor Coating Solutions
Industrial floors may experience continuous movement, equipment loads, abrasion, moisture and operational wear. Hindo Corp provides floor-coating solutions based on the surface condition and intended application.
Potential application areas include:
Warehouse Floor Coatings
Warehouse floors require surfaces that support product movement, storage operations and regular traffic. The proposed coating should be selected according to the movement of forklifts, pallet equipment, workers and stored materials.
Warehouse assessment may consider:
Manufacturing Floor Coatings
Manufacturing floors can face different operating conditions depending on machinery, processes and material movement. A project-specific coating recommendation should account for the actual industrial environment.
Important considerations include:
Commercial Floor Coatings
Commercial and institutional facilities may need coatings that balance appearance, durability, cleaning and maintenance. The system should be selected according to the expected traffic and use of the space.
Potential applications include:
Surface Inspection Before Coating
A coating system can perform effectively only when the existing surface is properly assessed. Hindo Corp evaluates the substrate to identify damage, contamination, moisture and previous treatments before recommending an application method.
The inspection may check:
Surface Preparation
Surface preparation helps the coating bond with the roof or floor. Applying a coating over dirt, loose material, corrosion or an incompatible existing finish can affect adhesion and performance.
Preparation may include:
Crack, Joint and Penetration Treatment
Cracks and joints can move differently from surrounding surfaces and may require focused treatment. Roof penetrations and equipment bases should also be assessed because these areas can become common water-entry points.
Detailed treatment may cover:
Selecting the Appropriate Coating System
There is no single coating solution suitable for every industrial roof or floor. Product and application recommendations should be based on the substrate, exposure, operating conditions and expected performance.
Selection factors include:
Roof Drainage and Water Management
A coating cannot compensate for every drainage or structural problem. Roof slopes, gutters and outlets should be inspected so that water can move away from the surface effectively.
Water-management checks may include:
Coating Application Process
Hindo Corp follows a coordinated application process based on the condition and requirements of the project surface. The exact method and number of treatment stages depend on the selected system.
A typical process may include:
Inspection and Maintenance of Coated Surfaces
Periodic inspection can help identify localized damage before it develops into a larger maintenance issue. Inspection frequency should reflect the surface exposure, operating environment and coating condition.
Maintenance checks may cover:
Information Required for a Coating Proposal
Clients should provide basic details about the property and existing surface so Hindo Corp can understand the requirement and arrange an appropriate assessment.
Useful preliminary information includes:
Why Choose Hindo Corp for Industrial Coatings?
Hindo Corp combines coating services with pre-engineered buildings, cold-storage construction, Light Gauge Framing Systems, solar installations and building accessories. This multidisciplinary capability can help clients coordinate surface protection with wider infrastructure requirements.
Hindo Corp’s approach emphasizes:
Frequently Asked Questions
1. What types of roofs can Hindo Corp coat?
Hindo Corp provides protective coating solutions for suitable metal and concrete roof surfaces. The recommended treatment depends on the roof’s condition and project requirements.
Applications may include:
2. What is Steel Tech Spray – Roof?
Steel Tech Spray – Roof, or STS-RF, is presented by Hindo Corp as a protective coating solution for industrial metal and concrete roofs.
Its stated purposes include:
3. Can roof coatings prevent water leakage?
A suitable coating system can support waterproofing when the surface, joints, cracks and penetrations are correctly prepared. The cause of leakage should be identified before treatment.
Common leakage areas include:
4. Are roof coatings suitable for rusted metal sheets?
A rusted metal roof may be coated after its condition and remaining structural integrity have been assessed. Loose corrosion and contaminants must be removed before coating.
The assessment should check:
5. Where can industrial floor coatings be used?
Industrial floor coatings can be considered for manufacturing, warehousing, processing, commercial and utility areas.
Applications may include:
6. Why is surface preparation important?
Surface preparation removes materials that can prevent the coating from bonding properly. The exact method depends on the substrate and its existing condition.
Preparation may remove:
7. How frequently should coated surfaces be inspected?
Inspection frequency depends on the operating environment, weather exposure, traffic and surface condition. High-exposure areas may need more frequent checks.
Regular inspection should review:
